One major concern is the location by installing skylights. Often the place where you want the sky will have a ceiling that is not close to the roof.
In other words, there is a loft in between. There are two basic solutions here. The first is to create a light shaft on the site, with regular building materials. You can browse www.calidad.net.au/installation-instructions if you're looking for skylights.
Shaft, sometimes quite large, ceiling connecting the roof. It is usually open on bot¬tom, and skylights are placed on top. Artificial lighting can be added to the evening.
With a very large shaft, interesting balusters can be added around where to place the plant or trinkets. On the other hand, tubular skylights, mentioned above, solves this problem easily.
Another concern is that the sky is properly installed. Many do-it-yourselfers today prefer self flashing flush-mount models.
You simply remove the appropriate amount from the roof, cut a hole to the correct size, and mount the sky directly above.
Image Source: Google
Flashing used to prevent water, equipped with a unit and you replace the roof above the right ingredients.
The edge- or edge-mount cheaper models require sidewalks built into the roof to accommodate skylights and flashing is produced on-site. Professional installation is required.
If the sky is not installed, it will indeed be leaking. For the professional installation is recommended. However, a do-it-yourselfer who buy themselves flashing flush-mount unit and fol¬lows instructions carefully should not matter.
Carefully install skylights in the roof tile. Roof itself fragile and just walk on them improperly can result in broken tiles.